Trusted HVAC and Plumbing Experts in Des Peres, MO

Completed an approved estimate for the installation of two surge protective devices at the Siemens main electrical panel. Photos document the panel's condition, including intact enclosure surfaces, a legible circuit directory, and an electrical final inspection sticker on the inner cover, with no visible rust or damage.

Responded to a reported thermostat malfunction on a 3-year-old gas furnace and performed a full diagnostic of the unit. Opened the furnace cabinet and inspected the pressure switch, inducer motor, gas valve, manifold, and low-voltage control wiring. Used a clamp meter and a handheld diagnostic meter to verify electrical operation and control circuit signals.

Performed a heating tune-up on one 9-year-old furnace, inspecting the system for safe and efficient operation, and verified the thermostat was set to heat mode at 72° with proper system response. Inspected the Trane whole-house humidifier and its duct connection, supply line, and drain tubing, finding all components clean and free of leaks, rust, or damage.

Installed a whole-home surge protective device (SPD) at the service entrance, connecting it to the main electrical panel to protect branch circuits and connected equipment from transient voltage spikes. Completed related repairs as needed, and verified the utility meter enclosure and panel cover were secure and in good condition upon completion.

Responded to a no-heat call on the gas furnace and replaced the failed two-stage gas valve. Installed the new valve, restored the gas and control wiring connections, and verified proper operation to return the system to normal heating function. Removed and disposed of the old valve.

Responded to a no-heat call on a 12-year-old York 90% gas furnace. Opened the unit and tested the ignition sequence, inducer assembly, and gas valve with a multimeter and digital manometer, and found heavy rust and corrosion on the gas pipe fitting and the cabinet floor, indicating moisture intrusion. Documented the findings with photos and inspected the equipment data. The whole-house humidifier check was requested but is not reflected in the documented findings.

Completed comprehensive Super Tune maintenance service on single-zone residential HVAC system consisting of basement-mounted furnace with Aprilaire humidifier and ground-level condenser unit located on back side of home. Performed full system inspection, cleaned and tested all components, verified thermostat operation showing 80° display reading, inspected humidifier mounting and ductwork connections, and confirmed proper airflow throughout system. All equipment found in good operating condition with no immediate repairs required.

Completed comprehensive heating tune-up on basement furnace unit. Performed full system inspection with burner assembly operational check, verified proper flame ignition and combustion, inspected all electrical connections and wiring harnesses, tested blower motor operation, examined control boards and safety components, and confirmed PVC venting system integrity. All components found operating within manufacturer specifications with no repairs required at this time.

Performed comprehensive cooling system tune-up on 4-year-old outdoor AC unit. Conducted standard maintenance procedures including system inspection, filter evaluation, and operational testing. Unit found to be in good working condition with clean filter media and proper airflow through evaporator coil and blower assembly.

Responded to no-cooling complaint with outdoor fan not operating. Upon arrival, inspected 10-year-old residential air conditioning system located at side of house. Found outdoor condenser fan motor failed, preventing proper heat rejection and resulting in inadequate cooling performance. Verified indoor air handler operation and checked refrigerant lines and ductwork in mechanical space. Diagnosed failed condenser fan motor as primary issue preventing system operation. Documented equipment condition with photos of indoor air handling components, ductwork, and mechanical room layout showing system configuration and status indicator lights.

Completed comprehensive heating tune-up on Lennox furnace system located in basement mechanical room. Performed standard maintenance protocol including inspection of heat exchanger, burner assembly, and venting system with dual PVC intake/exhaust configuration. Serviced humidifier unit as requested, checking water supply, drainage, and operational settings. Verified thermostat operation and system cycling, confirming proper communication between Sensi digital control and furnace. All components found operating within manufacturer specifications with no deficiencies noted. System tested and left in proper working order.

Responded to emergency call for wedding ring retrieval from shower drain. Upon arrival, removed existing drain cover and inspected drain assembly. Successfully retrieved wedding ring using specialized retrieval tools and confirmed no damage to item. Reinstalled drain cover and tested drain flow to ensure proper operation. No additional plumbing issues identified during service visit.

Completed comprehensive tune-up service on two 10-year-old air conditioning systems, one located in the basement and one in the attic. Performed standard maintenance procedures including inspection of control boards, electrical connections, and wiring configurations on both units. All circuit breakers, relay components, and terminal connections were examined and found operational, with photographic documentation captured of the electrical panels and control systems for service records.

Responded to no-cooling complaint on 10+ year old unit located in basement. Upon inspection, identified failed dual-run capacitor as cause of inadequate cooling and reduced airflow throughout home. Advised temporary shutdown of compressor with fan mode operation to prevent further damage until capacitor replacement could be completed.

Responded to service call for geothermal system blowing hot air in cooling mode on 15+ year old unit. Upon arrival, inspected outdoor ground loop connections and indoor air handler equipment. Identified blower motor assembly requiring attention based on age and operational symptoms. Documented equipment specifications and manufacturer information for replacement part sourcing. Customer advised to keep system off until repairs completed to prevent further issues.

Completed comprehensive Supertune maintenance on Lennox furnace unit located at ground level on side of home. Performed full system diagnostics with multimeter to verify electrical components, inspected and tested all internal mechanical systems, checked wiring connections and safety controls, and confirmed proper operation of thermostat control system. Unit is operating within manufacturer specifications and ready for the heating season.

Responded to no cooling complaint on Lennox system with thermostat displaying "outdoor unit pressure strike out" alert affecting entire home. Upon inspection, discovered severely clogged outdoor unit filter restricting airflow to condensing unit. Removed and cleaned/replaced heavily soiled filter showing extensive dust and debris accumulation. Cleared pressure fault, restored proper airflow to outdoor unit, and verified system returned to normal cooling operation. System tested and operating within manufacturer specifications.

Completed comprehensive cooling system tune-up on outdoor AC unit located at side of home. Performed full system inspection, accessing control panel to evaluate electrical components, circuit boards, capacitors, and wiring connections. Cleaned heavily soiled condenser coil which showed significant dirt and debris accumulation, restoring proper airflow through fin assembly. Inspected refrigerant lines and verified all electrical connections were secure throughout the system.

Replaced defective evaporator coil (S/N 1524A59989) under warranty coverage. Removed failed coil assembly, installed new replacement unit, connected refrigerant lines with proper brazing techniques, and verified all connections for leaks. System tested and confirmed operational for both heating and cooling modes upon completion.

Completed comprehensive cooling tune-up maintenance on four HVAC units located at the property, with two units positioned on the roof and two units in the backyard area against the garage. All units were under 10 years old and received full preventative maintenance service including inspection of blower assemblies, motors, electrical connections, and control boards, with all systems confirmed operational upon completion.