AC, Furnace & Plumbing Services in St. Charles, MO

Replaced failed evaporator coil on residential HVAC system to restore cooling capability. Evacuated and recharged system with refrigerant, performed leak test, and verified proper operating pressures and temperatures using digital manifold gauges. System tested and confirmed operational with appropriate superheat and subcooling readings.

Responded to no cooling call on 15+ year old Trane air conditioning system located in side yard. Upon arrival, inspected outdoor condensing unit and found condenser fan motor had failed completely, consistent with previous service visit where motor was showing signs of wear and had been temporarily serviced. Verified electrical connections at disconnect box and confirmed power supply to unit. Condenser fan motor requires replacement to restore system operation.

Completed annual heating maintenance tune-up on residential gas furnace system. Performed comprehensive inspection of furnace components, tested thermostat operation and calibration, checked all electrical connections, verified proper airflow, inspected heat exchanger for cracks or damage, tested safety controls and limit switches, cleaned burner assembly, checked gas pressure and combustion efficiency, inspected venting system, and replaced air filter. System found operating within manufacturer specifications with no deficiencies noted; thermostat maintaining proper temperature control at 69°F setpoint.

Completed comprehensive heating system tune-up and maintenance inspection on residential HVAC unit. System was found in proper working order with PRO1 digital thermostat functioning correctly and Aprilaire humidifier component operational. Performed standard preventive maintenance procedures including visual inspection of all accessible equipment, ductwork, and control components to ensure optimal performance for the heating season.

Responded to no heat call on newly installed system with breaker tripping when auxiliary heat engaged. Diagnosed wiring configuration issue causing electrical overload during auxiliary heat operation. Referenced manufacturer wiring diagrams and corrected thermostat connections per proper scenario specifications for multi-stage heating system, resolving breaker trip condition and restoring full heating functionality.

Completed comprehensive tune-up and maintenance on a Goodman central air conditioning system (Model: CAPF48RDC08A) and furnace assembly per Home Depot work order #F62302853. Performed full system inspection including blower assembly examination, verified proper operation of all components, and documented equipment specifications and serial numbers for service records.

Responded to service call for no hot water and gas odor at residential property. Removed existing failed gas water heater from utility closet and installed new 40-gallon natural gas atmospheric vent water heater. Connected copper supply lines, gas piping with shutoff valve, temperature and pressure relief valve discharge piping, and verified proper venting. Tested all connections for leaks, confirmed proper gas combustion, and verified unit operation meets manufacturer specifications and local code requirements.

Completed electrical service call involving estimate and troubleshooting work for installation of 10 new circuit breakers in the electrical panel. Assessed existing junction box wiring configurations, documented multiple wire connections secured with appropriate wire nuts, and verified proper wire bundling and grounding connections within wall-mounted electrical boxes.

# Tune-Up Service Completed on Two 10-Year-Old AC Units Performed comprehensive preventive maintenance tune-ups on two residential air conditioning systems located on the side of the property. Both units showed typical wear consistent with their 10-year age. Conducted thorough inspections of electrical components, control boards, and wiring connections on both systems. Verified proper operation of control boards and electrical connections, with multiple wire harnesses examined for secure termination points. Inspected exterior condenser units for weathering and operational integrity, noting surface discoloration from environmental exposure but confirming functional condition. Checked refrigerant lines, condensate drainage systems, and mounting stability on concrete pads. Both units operating within normal parameters upon completion of tune-up procedures.

Responded to customer report of flickering and dimming lights occurring when high-draw appliances such as microwave, air fryer, air conditioning unit, and washing machine were in operation. Performed comprehensive electrical system inspection including visual examination of main service panel, metering equipment, and garage electrical components. Assessed voltage stability and circuit loading conditions to identify potential causes of power fluctuations affecting lighting circuits throughout the residence.

Successfully installed REME HALO air purification system into existing HVAC air handler unit. Unit was mounted to interior wall of air handling system with proper electrical connection established, and system was tested to ensure proper operation. The air purification device is now actively treating air as it circulates through the HVAC system.

Completed comprehensive tune-up maintenance on a basement-installed furnace unit equipped with an Aprilaire humidifier. Performed standard inspection of all system components, ductwork connections, and ventilation pathways to ensure proper operation and efficiency. All equipment found to be in functional condition with no immediate repairs required at this time.

Installed six customer-supplied smoke detectors throughout the residence, mounting units to ceiling surfaces and ensuring proper power connections with operational LED indicators confirmed on all devices. All detectors were tested and verified functioning correctly upon completion of installation.

Completed comprehensive air conditioning tune-up and maintenance on a 7-year-old residential cooling system. Performed standard preventive maintenance procedures including inspection of thermostat operation, verification of air return grille and filter condition, system performance testing, and overall equipment assessment. All components found operating within normal parameters with no deficiencies noted; system confirmed in proper working condition.

Replaced seven smoke detectors throughout the property to ensure proper fire safety compliance and functionality. All units were installed according to manufacturer specifications and local electrical codes, with proper mounting and power connections verified. System tested successfully upon completion with all detectors responding appropriately to test activation.

Installed inline condensate drain on HVAC system and replaced air filters with two 20x25x4 slim filters. System tested and verified proper drainage and airflow upon completion.

Responded to service call for intermittent banging and knocking noises in walls and vibration under floor, occurring primarily at night in bedroom area over past three years. Inspected 16-year-old furnace unit in utility closet and examined accessible ductwork and refrigerant line set routing throughout home. Evaluated potential thermal expansion/contraction points where metal ductwork and copper line set may contact wood framing or pass through wall cavities, checking for inadequate clearances or missing isolation materials. Documented equipment condition and installation with photos for reference. Advised customer that noises are consistent with normal thermal expansion of ductwork and refrigerant lines as system cycles, particularly noticeable during overnight temperature fluctuations when ambient noise levels are lower.

Relocated 220-volt electrical outlet to opposite side of laundry room to accommodate new appliance placement and plumbing configuration. Installed new wiring run through wall cavity, verified proper circuit protection, and confirmed outlet functionality and code compliance upon completion.

Responded to no cooling complaint on unit U10 located at side of home. Upon arrival, instructed occupant to turn off AC unit while leaving fan running to prevent further system stress. Performed diagnostic evaluation and measured temperature readings using digital clamp meter, which indicated 53.3°F at the tested location. Assessed electrical components and system performance to identify root cause of cooling failure.

Responded to cooling complaint where system was unable to adequately cool the residence. Upon arrival, performed diagnostic evaluation of outdoor condensing unit. Opened electrical disconnect panel and inspected internal components including contactor, capacitor, and electrical connections. Tested capacitor function and verified proper voltage to unit. Examined refrigerant lines, electrical wiring, and overall system operation to identify root cause of cooling deficiency. Unit was successfully diagnosed and appropriate repairs completed to restore proper cooling performance.