Kirkwood HVAC & Plumbing Services

Completed annual heating maintenance tune-up on residential HVAC system. System was operating properly upon arrival. Performed comprehensive inspection and maintenance of heating equipment, including Aprilaire whole-home humidifier unit with water supply connections and associated ductwork. Verified thermostat operation and calibration on Sensi programmable digital unit. Documented equipment conditions with photos for service records. All components functioning within normal parameters at completion.

Responded to no cooling complaint on 10+ year old residential air conditioning unit located on side of home. Upon arrival, performed diagnostic evaluation using manifold gauges to measure system pressures and temperatures. Inspection revealed AC unit model AC58338A41 with compromised cooling performance. Tested refrigerant levels, compressor operation, and system pressures to identify root cause of cooling failure. Documented equipment nameplate data and current operating conditions. Provided free second opinion assessment as requested for new customer referral from neighboring property.

Completed comprehensive heating tune-up and maintenance on basement furnace unit. Performed full system inspection including filter evaluation, humidifier operation check, and verification of all mechanical components and connections. Filter showed normal dirt accumulation and was assessed for replacement recommendation. Humidifier unit mounted on supply ductwork was inspected with water line and brass valve connections confirmed secure and functioning properly. All HVAC equipment found operating within normal parameters with no immediate service concerns identified.

Responded to no-cool complaint on 7-year-old Trane system with secondary issue of condensate drain overflow causing water damage in hallway. Upon inspection in attic space, found primary condensate drain line completely blocked, preventing proper drainage and causing water to back up into secondary overflow pan. Cleared blockage from drain line using appropriate methods and verified proper flow and drainage. Inspected evaporator coil and drain pan for debris accumulation and signs of microbial growth. Tested system operation following drain clearing to confirm proper cooling function and condensate removal. Verified all electrical connections secure on air handler and confirmed proper airflow through system. System restored to normal operation with adequate drainage and cooling capacity confirmed.

Completed annual heating maintenance on a 9-year-old furnace system. Replaced dirty air filter with new PFCC filter, inspected thermostat operation showing 74°F, and verified all system components functioning properly with no additional accessories requiring service.

Responded to no cool/no airflow complaint following recent maintenance visit. Upon inspection, found severely restricted air filter completely blocking airflow to system. Filter media was heavily loaded with dust and debris, preventing air circulation through ductwork despite unit attempting to operate. Removed and replaced clogged filter with properly sized filter, restoring full airflow throughout home and normal cooling operation.

Completed preventive maintenance tune-up on 10-year-old furnace system located in basement. Performed comprehensive inspection of heating unit, ductwork, and integrated humidifier system. Verified proper operation of all components, checked air filter condition, and confirmed system functionality for continued safe operation during heating season.

Performed comprehensive evaluation of dual-unit HVAC system serving three-story residence where inadequate cooling and airflow distribution issues were reported. Inspected both 10+ year-old units located on side of home, examined furnace control board with Surelight components and wiring connections, verified proper operation of electrical components including capacitor, assessed ductwork configuration in basement mechanical room, and evaluated 16x25x1 air filtration system. Provided customer with zone mapping to clarify which unit serves each floor and recommended adjustments to improve cooling efficiency and air distribution throughout all levels of the home.

Completed preventive maintenance tune-up on two heating units located in basement. Performed comprehensive inspection and maintenance procedures per U10 protocol on both systems, including filter replacement with 16x20x1 pleated filters. Verified thermostat operation and system response, confirming heat mode functionality with proper temperature control and indoor humidity monitoring at 28%. Customer enrolled in preventive maintenance agreement onsite and scheduled upcoming spring maintenance visit.

Performed comprehensive heating tune-up on a 10+ year old system located in utility closet. Conducted electrical diagnostics using multimeter to test blower motor assembly and capacitor, recording voltage readings of 75.4V to verify proper system operation. Inspected all electrical connections, wire bundles, and components within the unit to ensure safe and efficient heating system performance for the upcoming season.

Responded to no cooling complaint on 20-year-old Armstrong air conditioning system. Upon arrival, confirmed condenser unit running but compressor not engaging, resulting in hot air discharge throughout residence. Diagnosed failed dual run capacitor with bulging top and zero microfarad reading. Replaced capacitor with OEM-rated component, restored compressor operation, and verified proper cooling cycle with 18-degree temperature split across evaporator coil. System returned to normal operation with adequate airflow and refrigerant pressures within manufacturer specifications.

Completed comprehensive cooling system tune-up on outdoor condensing unit located on side of home. Performed full preventative maintenance protocol including inspection of compressor operation, refrigerant levels, electrical connections, and condenser coil condition. Unit showed signs of age with accumulated debris in coil fins; cleaned exterior surfaces and removed organic matter from base area to ensure proper airflow and efficient operation.

Responded to callback for 1-year-old Lennox system experiencing short cycling issue following capacitor replacement from previous day's service. Upon arrival, verified unit was running continuously but only providing cooling for approximately five minutes before compressor would cycle off while blower continued operation. Performed comprehensive electrical diagnostics using clamp meter to check voltage, amperage, and capacitance readings at compressor and condenser fan motor. Identified improperly sized or defective replacement capacitor from previous service call. Removed incorrect capacitor and installed manufacturer-specified capacitor with proper microfarad rating for system. Verified all electrical connections were secure and properly torqued. Cycled system through multiple cooling cycles to confirm compressor maintained continuous operation under load. Monitored run times, temperatures, and amp draws to ensure system returned to normal operating parameters. System now cooling pro

Replaced failed blower motor on Trane unit (serial 21446p4ajg) that had ceased operation. Upon inspection, discovered severely burned and charred electrical connectors at the motor connection point, indicating electrical failure and overheating. Removed old blower motor assembly showing significant rust and corrosion on housing. Installed new blower motor with fresh electrical connections and verified proper operation. System tested and confirmed cooling functionality restored with thermostat responding correctly to temperature calls.

Responded to emergency no-cooling call with indoor temperature at 90 degrees. Upon arrival, found outdoor condenser unit shut off. Performed diagnostic inspection of 10-year-old split system located on side of home. Identified failed electrical connection at condenser control board causing system shutdown. Disconnected and replaced damaged wire connector, secured all low-voltage wiring connections, and restored power to unit. Verified proper operation of condenser fan motor and compressor startup. System cooling normally upon departure with indoor temperature dropping.

Responded to no cooling complaint on Unit 10 located at side of home. Upon arrival, inspected control board and thermostat system. Found thermostat displaying 79°F with system in OFF mode. Examined Emerson digital thermostat controls and verified proper display function. Inspected main control board assembly including circuit board components, relays, capacitor, and wire harness connections. Instructed occupant to turn OFF AC unit and leave fan ON/running for system protection. Documented control board and thermostat conditions with photos for service records.

Responded to no cooling complaint on five-year-old Lennox air conditioning unit. Customer was not home at time of arrival, left door hanger notification with contact information to reschedule diagnostic service call.

Completed standard cooling system tune-up on single AC unit. Inspected and cleaned heavily soiled air filter showing significant dust and debris accumulation across entire surface. Performed comprehensive system evaluation including airflow assessment, refrigerant level check, electrical connections inspection, and condenser coil examination. Unit operational upon completion with improved airflow efficiency following filter maintenance.

Completed comprehensive Elite electrical inspection of residential service panel and distribution system. Documented existing main breaker panel installation in wooden-framed utility area, noting standard gray metal enclosure with hinged door and secure latch mechanism. Inspected interior circuit breaker configuration revealing multiple branch circuits with mixed breaker types including standard single-pole and multi-pole devices. Observed existing circuit identification system with handwritten labels and documentation posted adjacent to panel for reference. Verified panel accessibility and noted presence of service documentation including circuit schedules affixed to surrounding wall structure. Assessed overall panel condition, identifying normal operational wear and minor surface soiling consistent with typical residential use. Photographed panel exterior and interior arrangements for maintenance records, capturing current breaker positions, labeling system, and general installation

Responded to no cooling condition on second floor system. Replaced defective hockey puck wet switch that was preventing unit operation. Insulated primary drain pan to prevent condensation issues and improve system efficiency.